The 403 Nailer comes ready to angle nail 3/8/, 1/2, 5/8, 3/4 and 33/32 In. T & G flooring and will face nail to handle the first and last few strips of flooring. 

Thin Flooring Shoe Included.  Face Nailing Shoe Included.  Comes Ready to Nail 3/4" Solid Wood Floors.  Non Marring Hammer with a Grey Cap

Portable and lightweight, the BX-C incorporates an Open-back design that allows for material up to 16" long and 5" deep to be cut and the plastic dust collection pan makes on site dust control a snap. Rental includes stand and Blade.  1 1/2 HP

2700 PSI @ 2.4 GPM Direct Drive Aluminum Frame Pressure Washer 

• 50' 3/8" Non-Marking Hose
• Assorted High Pressure Spray Nozzles included
• Pneumatic Tires With Tubes

196cc Honda GX200 OHV With Low Oil Shut Down

Milwaukee's 11 amp Sawzall® Reciprocating Saw is the most durable reciprocating saw on the market, and at only 7 pounds, it offers the best power to weight ratio in its class. The saw offers a 0-2800 strokes per minute variable speed trigger with 3/4 in. stroke length and a QUIK-LOK™ blade clamp for fast, tool-less blade changes

1/2" Right Angle Drill, 0-335 RPM/0-750 RPM

• 1/2" capacity in steel, handles up to a 4-5/8 in. selfeed bit.
• Trigger speed control in two ranges: 0-335/0-750 rpm, reversing.
• Powerful 7 amp motor.
• Head and handle swivel 360°

• 16" tilling/cultivating width
• Combines maneuverability of a mini tiller with power of a mid/rear tine tiller
• Tines spin up to 240 rpm, twice that of other tillers
• One-piece cast gear box keeps dirt out
• Finger tip speed control & shut-off switch
• Kick Stand included
• Honda 35cc 4-cycle engine

• Compact & lightweight
• 9" tilling/cultivating width
• Tines spin up to 240 rpm, twice that of other tillers
• One-piece cast gear box keeps dirt out
• Finger-tip speed control and shut-off switch
• Push button priming
• Throttle-activated centrifugal clutch so tines engage only when throttle is squeezed
• Weight: 20 lbs.
• Commercial 4-cycle engine

• SLASHER TINES
• 8" TILLING DEPTH
• 18" TILLING WIDTH
• STEEL CONSTRUCTION

Perfect for small to medium gardens.  

• 30" Single Edge Blade
• Dual-reciprocating blades
• Cut 1" thick branches
• 3500 cuts per minute
• Stamped, hardened steel blades stay sharp longer
• Weight: 12.25 lbs.
• Commercial 21cc displacement 2-cycle engine

Little Wonder 10" Pro Edger features dual drive belts to give you more belt grip capable of edging up to 90 feet per minute. Edger establish crisp, distinct edges up to 3 inches deep. With the independent belt engagement, operator can set cutting depth prior to engaging the blade, giving you better results especially at start up

• Independent belt engagement
• Dual drive belts
• Cast iron cutting head
• Steel deck and wheel rims
• Edges up to 3" deep

Little Beaver 5.5HP mechanical earth drills with their torque-free design can easily dig up to a 8" diameter hole for fences, decks, signs, or mail boxes. Also known as a post hole digger, earth drill or power auger. It can easily be loaded into a car trunk or SUV.

• The custom handle design and torque tube allow One-Person operation without any kick back to the operator. A heavy duty centrifugal clutch reduces the risk of damage to the drive train when encountering solid underground objects. Features:
• Padded handle reduces operator fatigue
• Easy reach throttle and on-off switch
• 4", 6" and 8" auger bits available
• Heavy duty fiber lined clutch
• Powder coated finish to reduce scratches and rust
• 8" Semi-pneumatic tires
• Solid steel carrier and axles
• Shipping weight 127 Lbs

WILTON Unbreakable 30" Handle Sledge Hammer, 12LB Head -- Unbreakable handle is made with tempered steel, and surrounded by heavy-duty molded rubber. Ergonomic handle absorbs shock, ensures comfort and has a slip-resistant grip. High-visibility head adds instant identification under any job site conditions; encourages safe work habits. Not to be used to strike any object harder than 46HRC. Never replace a sledge handle again! Outlasts wood and fiberglass handle sledges by thousands of strikes

• 24 Ton Towable Log Splitter
• Special Duro-Glide System on Rail and Glides
• 9 HP Honda Engine
• 25" Log Opening
• Vertical/Horizontal Operation

Gas 14" Concrete cut off saw.  Diamond and Masonry blades available for additional charge.  

The Sno-Konette was the world's first complete Sno-Kone® with display case. To operate, simply lift the pusher handle, fill with chunks of ice, turn on the motor and pull the handle. You can vary the fineness of the finished snow by using colder ice, putting less pressure, or by setting the blades to shave more finely. Shaves up to 500lbs. of ice per hour. Sno Kones are the perfect frozen treat for most any party or special event!

Assorted flavored syrups available for additional charge.  

Easy Rooter Jr with 50ft cable.  Multiple bits included.  

There are two styles available.  

The traditional edger has a blade that cuts a small gap between grass and the area you are trying to neatly separate from the turf allowing for the installation of black resin lawn edging.  Neatly piles excavated dirt in an easy to back-fill pile right next to the trench

The brick edger creates a wider trench allowing for the installation of decorative brick edging.  

• 7" Disc Edger

• Runs at 3600 RPM
• 25' Cord with Dust Bag

Assorted grit sandpaper available for purchase

The SL8V2 floor sander combines tilt action sanding and a drum that runs at a slow constant speed to allow the DIYer to achieve professional results!

• 8" Drum Sander
• 1800RPM
• 1.5hp motor
• Hook & Loop Drum - no tool required!
• 25' cord with Dust bag

Assorted grit sandpaper available for purchase

The Hand drain cleaner is a simple, manual powered unit for sinks, showers,etc. The 1/4" cable is extra flexible for the even smallest inside drain line and extends 25 ft.

• Model S drill unit with 3/8" x 25' inner core cable with expanded end cable

This hand held drill powered drain cleaner includes a variable speed commercial grade drill to clean sinks, showers and tubs

• Model R drain cleaner with 5/8"x100' Tri-Max cable
• 4 cleaning tools

The Model R Drain Cleaner is professionally engineered to clean 3"-6" drain lines for distances up to 100ft. The unit features a heavy duty 1/3HP motor,extra large steel tubing frame, and snap-lock tool connectors which eliminates screws rusting or losing a tool in the line. This Model r is set up with a larger 3/4" diameter cable for maximum performance and durability

36" gas reduced speed power trowel with 9HP engine

JR Power Stretcher Kit is for stretching and flattening of carpet

• Features a 14 - 1/2" wide aluminum pin plate with 59 adjustable nickel plated pins
• Non-marring tail block
• Includes 4 tubing sections for operating length from 34 1/2" to 22'
• Sturdy carrying case included
• Kit is 34 1/2" closed and 61 1/4" open
• Adjusts in 4" increments